Professional Manufacturer of Package and Printing Machine    E-mail: [email protected]

Product Search

Handheld Portable Waste stripper

Products

Handheld Portable Waste stripper

Product No.:HN-05

Price:negotiate

Type:Pneumatic

Weight:7KG

Chain:#3 chain

Revolution:4500 turns per minute

Working pressure:0.6~0.8 MPA

Motor:TAIWAN

Paper type:all kinds of paper board

  • Details
Manual Cardboard Waste Stripper - Model HN-05

The paper waste stripping machine is a pneumatic tool specifically designed to eliminate waste edges from cardboard, fine corrugated, and standard corrugated paper within the printing industry. It acts as an alternative to manual hammers, significantly improving work efficiency and minimizing the time needed for waste removal.

Item Details:

Warranty: 1 Year
Type: Other
Applicable Industries: Packaging, Printing, Carton, Box, Paper Roll
Video Outgoing Inspection: Provided
Machinery Test Report: Provided
Warranty for Core Components: 1 Year
Core Components: Bearing, Gearbox, Motor, Gear
Condition: New
Application: Machinery & Hardware
Packaging Type: Cartons
Packaging Material: Paper
Automatic Grade: Automatic
Driven Type: Pneumatic
Voltage: Client-Specified
Place of Origin: China
Brand Name: CHAOYI
Weight: 6 KG
Dimensions (LWH)😗* 450 x 200 x 250 mm
Key Selling Points: High Productivity



The carton stripper offers a safe and cost-effective solution for removing waste paper from die-cut sheets, cardboard, and corrugated board.

This waste stripper features a multi-tooth chain drive powered by a compressor air motor with a speed of 4500 RPM. Instead of cutting the paper, the teeth grip it, allowing the operator to simply hold the device. The waste stripper completes this task up to 10 times faster than manual methods.

Designed for stripping waste margins from cardboard, thin corrugated paper, and standard corrugated paper in the printing industry, the high-speed gear is driven in cycles by the air motor, utilizing sharp-toothed gears to strip waste margins. The gears are made from high-strength diamond compound and undergo heat treatment, ensuring high hardness, wear resistance, long lifespan, and easy replacement.

This product is a highly efficient manual stripping tool, increasing stripping efficiency by 10 times. While manual stripping can take hours, the machine can complete the task in just 10 to 30 minutes, significantly reducing delivery times.

With a compact design and a weight comparable to a standard grinder, it is user-friendly. Workers can operate the machine after minimal training. The stripping process does not damage the bonding area, enhancing the efficiency of subsequent processes such as gluing and automatic packing.

01 Usage Requirements

Air Pressure: 0.6 to 0.8 MPa
The air compressor should have a capacity of 4 kW, 5.5 HP, or higher.

Production Requirements for Die-Cutting Boards (Very Important!)
To optimize performance with the waste stripper, the die-cutting boards should be divided into several sections as specified. This allows the stripper to efficiently remove smaller pieces of waste. Ideally, the external waste edges should be die-cut into strips measuring between 250 mm and 450 mm in length. The exact length of these strips will depend on the shape of the paper product, the width of the waste edges, and the number of sections. Fewer, wider strips will facilitate faster waste removal.

02 Maintenance Guidelines

It is advisable to inspect and maintain the cleaning tools approximately every two months. Check that bearings, gears, chains, and other moving parts are well-lubricated and clean. Inject bone grease into the oil hole of the motor head to ensure the internal gears are fully lubricated. For tools used frequently, routine checks and lubrication every two weeks are recommended.

Regularly clean the air motor blades based on usage conditions. To clean, loosen the air inlet pipe, inject a small amount of low-viscosity lubricant, reconnect the air pipe, and run the motor for 30 seconds. Then, loosen the air pipe to drain the dirty oil, followed by adding a small amount of lubricating oil. You can also inject other moisturizing agents through the exhaust port.

If the tool is not used for an extended period, it is advisable to add a small amount of lubricating oil through the air inlet and run the tool for a few seconds before storage to keep the internal components lubricated and prevent rust.

Precautions

After daily use, spray WD-40 anti-rust oil on the chain to clean it, use a dust blower to remove paper dust, and then apply a small amount of lubricating oil. Proper maintenance is crucial for extending the chain’s lifespan (very important).

Dealing with Jammed Paper: Disconnect the air supply (very important). If the chain is stuck, loosen the screws on the protective cover, remove each screw, and turn the rail to clear the jammed paper before reassembling the screws to continue operation.

Regularly check the chain tension and adjust as necessary. After adjustment, if the longest section of the chain sags about 1 mm when horizontal, the tension is likely correct. A chain that is too loose may collide with the safety shield during operation, causing damage.






Pneumatic Stripping Machine: Guidelines and Precautions

Paper Preparation: Stack the paper neatly to eliminate waste, ensuring all four sides are flush with a knife edge. The spacing between knife edges should allow for easy stacking. Organize the knife edges to create a gap that connects the waste edge to the product. Use a 5 mm gap when clearing the edge.

Applicable Paper Types: Suitable for 200 g/m² to 500 g/m² cardboard, single/double wall paper, and double-pitched crepe paper.

Application Tips for the Pneumatic Waste Disposal Machine:

Air Compressor Installation: Users should install the air compressor themselves. For safe and efficient operation, set the compressed air pressure to 0.63 MPa. It is recommended to use a combination air filter (two pieces) connected to the air compressor output.

Maintenance: Regularly remove paper dust from the machine to ensure proper functioning.

Operating Instructions for the Pneumatic Waste Disposal Machine:

Maintenance of Pneumatic Tools: Unlike other pneumatic tools, the pneumatic stripper requires specific maintenance. After a one-week break-in period, ensure the chain and sprocket slide smoothly. Apply a few drops of gear oil every half day to reduce friction and extend service life.

Air Source Connection: Connect the machine to the air source, ensuring the air pressure is set between 6-8 kg, with an air pipe size of 8*12 mm.

Chain Movement Check: Before turning on the air pressure, ensure the chain can roll freely by hand. Adjust the paper-cutting machine’s direction and secure the locking screw to prevent movement.

Daily Oil Application: Before and after each work shift, add three to four drops of special oil for pneumatic tools through the air inlet and let the machine idle for 2-3 seconds.


FAQ:

Q1: Are you a trader or a manufacturer?
A: We are a manufacturer with export qualifications.

Q2: Do you offer OEM services?
A: Yes, we provide OEM services.

Q3: Where is your factory located?
A: Our factory is located in Shenzhen, China.

Q4: What is the nearest airport to your factory?
A: The nearest airports are Yantian and Shekou, both in Shenzhen.

Q5: Where is the closest high-speed train station, and how long does it take to reach the factory?
A: The nearest high-speed train station is Shenzhen North, and it takes about 1 hour to get to the factory.

Q6: What is your business process?
A: We discuss client requirements, confirm the machines, create a sales contract, receive a deposit, arrange production, complete the machines, allow the buyer to test them, receive the final payment, and then deliver the machines.

Q7: How do you ensure machine quality?
A:

At CHAOYI, machine quality is our priority, and we maintain a strict quality control system from production to delivery.
All materials used are environmentally friendly and non-polluting.
We have professional technicians supervising production.
A dedicated department examines every stage of the production process.
Q8: Can your engineers travel abroad for machine debugging?
A: Yes, our engineers can travel abroad for machine debugging, but the buyer is responsible for their round-trip airfare, accommodation, meals, and a salary of $80 per day.

Next Product:Handheld Handheld Waste Stripper

Post your feedback

Wechat Code
Wechat
Whatsapp Code
Wechat